The telescope requires eyepieces to view images. An eyepiece is not included
with the VMC260L.
①
Choose a conspicuos target in the distance
and place the target in the center of the field
of view of the telescope.
In the illustration, a distant tower is brought
into the center of the field of view of the
telescope.
②
As you look through the finder scope, you
should find the same target somewhere
within the finder‘s field of view. The finder
scope has a crosshair.
③
Align the optical axis (field of view) of the
finder scope with the optical axis (field of
view) of the telescope. Adjust the finder
scope by loosening or tightening two of the
three adjustment screw at a time, in turn,
until the target is in the same position, in
the center of the crosshair.
•
Adjusting the Finder Scope
VMC 260L for SXD
Focus Mount
SX60
→
50.8AD
Diagonal
31.7mm Eyepiece
Flip Mirror Diagonal
#2956
Extension Tube VC
EA60mm to 50.8mm
#3725
CCD Adapter F
CCD Video Camera
C-Mount Tele-
Extender 2.4X
T-C Ring
C-Mount Reducer 0.6X
SLR Camera
T-Ring
Detaching the inner ring
of T-Ring
Wide Photo Adapter 60mm
Camera Adapter 43 DX
Focal Reducer
Eyepiece Adapter
42mm to 31.7mm
push-fit
NLV Eyepiece
DG-NLV DX Digital Camera Adapter
Digital Camera
Camera Adapter 43 DX
NLV Eyepiece
Extension Tube
VC
64mm DC
Ring
55mm DC
Ring
SX60-50.8AD
VMC260L
Focus Mount
(Eyepiece Holder)
(Connecting Tube)
(Direct Focus
Photo Ring)
Eyepiece Projection Camera Adapter
Field of view of the 7X50 finder scope
Field of view of
the finder scope
Finder Bracket
Target
In the
center
of the
Telescope‘s
eyepiece.
A: Screwing
the bolt
B: Fastening the finder scope by
turning the nut
(
Visual Configuration
)
(
Photographic Configuration
)
Nut
ACCESSORY CHART
ALIGNING THE
FINDER SCOPE
3
