Handling and Storage
Do not leave the product inside a car in bright sunshine or in other
hot places. Keep any strong heat sources away from the product.
When cleaning the body, do not use solvents such as paint thinner
or similar products.
Do not expose the product to rain, water, dirt or sand.
For storage keep the product in a dry place and do not expose to
direct sunlight.
Blow off dust on lenses using a commercially available blower
brush.
Avoid touching any lens surfaces directly with your hands. In
case a lens becomes dirty with fingerprints or general smears,
gently wipe it using a commercially available lens cleaner and a
lens cleaning paper or cloth, or consult your local Vixen dealer.
Be sure to touch the lens surface with the most care to prevent it
from scratching by accident.
Contents
To begin with ------------------------------------------------------ P 2
--------------------------------------------------------- P 2
-------------------------------------------- P 3
---------------------------------------- P 4
------ P 2
Be sure to read the instructions carefully before use
Warning
Handling and Storage
-------------------------------------------------------- P 4
Description
Setting up the Telescope
Reproduction of a Point in Focus ------------------------------ P 7
1. Attaching the Telescope to the Mount
2. Attaching the Finder Scope
3. Focusing the Telescope
4. Reading the Graduations on the Focus Ring
About the Vernier Scale
--------------------------- P 4
--------------------------------------- P 5
------------------------------------------- P 5
------------------- P 6
---------------------------------------------- P 6
Photographic Components Guide
(Prime Focus Photography)
Photographic Components Guide
(Eyepiece Projection Photography, Afocal Imaging Photography)
Visual Observing Components Guide
Filter Attachment
----------------------------------- P 7
----------------------------------- P 8
------------------------------ P 9
------------------------------------------------------ P 9
Focuser Squaring Adjustments -------------------------------- P10
Specifications ---------------------------------------------------- P11
3
