3
21
Locking/Unlocking a Custom Picture Mode
Custom picture modes can be locked/unlocked with a unique PIN to
prevent accidental changes to their settings.
To lock all custom picture modes:
1. From the PICTURE MODE EDIT
menu, use the
Arrow buttons to
highlight
Lock Picture Mode, and
then press
OK. The LOCK PICTURE
MODE menu is displayed.
2. Use the
Number Pad on your
remote to enter a unique 4-digit
PIN. If a system PIN is set, then lock/
unlock. If no system PIN is set, then
you will be prompted to set a PIN.
3. Highlight
Save and press OK.
4. Press the
Exit button to exit the
menu screens.
To unlock all custom picture modes:
1. From the PICTURE MODE EDIT
menu, use the
Arrow buttons to
highlight
Lock Picture Mode, and
then press
OK. The LOCK PICTURE
MODE menu is displayed.
2. Use the
Arrow buttons to select Off.
3. Use the
Number Pad on your remote to enter your 4-digit PIN.
4. Make any desired changes to the picture modes.
5. Then turn ON Lock Picture Mode.
6. Press the
Exit button to exit the menu screens.
Deleting a Custom Picture Mode
Custom picture modes that are no longer needed can be deleted.
Inputs assigned to a deleted custom picture mode become
assigned to the
Calibrated picture mode.
To delete a custom picture mode:
1. From the PICTURE MODE EDIT menu,
use the
Arrow buttons to highlight
Delete Picture Mode, and then press
OK. The DELETE PICTURE MODE window
is displayed.
2. Use the
Left/Right Arrow buttons to
highlight
Delete and press OK.
3. Press the
Exit button to exit the menu screens.
Resetting a Picture Mode
A preset picture mode that has been edited can be restored to the factory
default settings.
To reset a customized preset picture mode:
1. From the PICTURE MODE EDIT menu,
use the
Arrow buttons to highlight
Reset Picture Mode, and then press
OK. The RESET PICTURE MODE window is
displayed.
2. Use the
Left/Right Arrow buttons to
highlight
Reset and press OK.
3. Press the
Exit button to exit the menu screens.
To delete the user created Custom 1
picture mode, select the Delete button.
Delete
Cancel
Select Reset to restor the Standard
picture mode to factory defaults.
Reset
Cancel
Lock Picture Mode
Back
Enter the System PIN to lock all custom picture
modes.
Cancel
Save
System Pin Code
