3
24
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1. Press the
Menu button on the
remote. The on-screen menu
is displayed.
2. Use the
Arrow buttons on the remote
to highlight Audio and press
OK. The
Audio menu is displayed.
3. Use the
Arrow buttons to highlight
the setting you wish to adjust, then
press
Left/Right Arrow buttons to
change the setting:
• Speakers - Turns the built-in speakers
On or Off.
• Volume Control Display - Toggle
between On or Off to hide or display
the on-screen volume slider that
appears when volume is adjusted.
• Surround Sound - Surround sound
uses DTS TruSurround™ to deliver
an immersive surround sound
experience from the TV’s internal
speakers. TruSurround completes
the entertainment experience by providing deep, rich bass and by
delivering crisp details and clear, intelligible dialog. Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume™ to
maintain consistent volume levels during transitions between
program content, AV formats, and input sources. Select On or Off.
In a few cases, volume leveling may artificially suppress volume
increases, making it difficult to hear dialog or flattening sudden
noises. If this occurs, turn volume leveling off.
• Balance - Adjusts the loudness of the audio output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the display image
and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for digital audio
out and HDMI ARC output when connected to a home theater audio
system. Select Auto, PCM, Dolby D or Bitstream.
• Analog Audio Out - Sets the volume control properties for the RCA
connector when connected to a home theater audio system. Select
Variable if you are controlling the volume with the TV’s volume
controls, or select Fixed if an external audio device (sound bar or AV
receiver) will control the volume.
4. When you have finished adjusting the audio settings, press the
Exit
button on the remote.
Audio
Speakers Auto
Volume Control Display On
Surround Sound On
Volume Leveling On
Balance 0
Lip Sync 0
Digital Audio Out Auto
Analog Audio Out Fixed
Back
When the TV speakers are set to On, DTS signals cannot be
passed through digital audio outputs.
You must select
Bitstream for audio with more than two
channels (3.0, 5.0, or 5.1, for example).