3
35
Setting the Time and Local Settings
To ensure the correct time is displayed when you press the
Info button,
set the TV’s time zone:
1. Press the
Menu button on the
remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote
to highlight
System and press OK.
The SYSTEM menu is displayed.
3. Use the
Arrow buttons on the remote
to highlight
Time & Local Settings
and press
OK. The menu headed by
the local date and time is displayed.
4. Highlight
Time Zone and press OK.
The TIME ZONE menu is displayed.
5. Highlight your time zone and press
OK.
6. Highlight
Daylight Saving Time and
press
OK. The DAYLIGHT SAVING
TIME menu is displayed. Choose
On if
it is currently Daylight Savings Time,
Off if it is Standard Time, or Auto to have the system automatically
detect Daylight Savings Settings.
7. Press the
Exit button on the remote.
Adjusting the CEC Settings
The CEC function on your TV enables you to control devices connected to
HDMI (ARC) input with the included remote, without any programming.
Using CEC, your VIZIO TV remote can control:
• Power On/Off
• Volume
• Mute
Not all HDMI devices support CEC. See your device’s user
manual for details.
To enable, disable, or adjust CEC settings:
1. Set up your audio device and connect it to the HDMI-1(HDMI Arc)
input on the TV
2. On your audio device, select the HDMI ARC input.
3. Press the
Menu button on the remote. The on-screen menu is
displayed.
4. Use the
Arrow buttons on the remote to highlight System and press
OK. The SYSTEM menu is displayed.
5. Use the
Arrow buttons on the remote to highlight CEC and press OK.
The CEC menu is displayed.
6. Highlight
CEC and press OK. Select a setting and then press OK.
• CEC - To use CEC, you must select Enable.
• Device Discovery - To determine if your device is connected and
supports CEC, select
Device Discovery and then press OK.
7. Press the
Exit button on the remote.
Adjusting the Power Mode
Your TV is set to Eco Mode by default. When the TV is powered off, Eco
Mode setting uses less than 0.5W of power. Quick Start Mode enables
your Display to power on faster.
Please note that by changing this setting the energy
consumption required to operate this device will change.
To switch between Eco Mode and Quick Start Mode:
1. Press the
Menu button on the remote. The on-screen Menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and press
OK. The SYSTEM Menu is displayed.
3. Use the
Arrow buttons on the remote to highlight Power Mode and
press
OK. The Power Mode Menu is displayed.
4. Highlight either Eco Mode or Quick Start Mode and press
OK to
select.
Time and Local Settings
June 11, 2018 11:48AM
Time Zone Pacific (-8)
Daylight Savings Time Auto
Time Format
Country USA
Back