3
37
USING THE RESET & ADMIN MENU
You can use the TV’s RESET & ADMIN menu to restore the TV to its factory
default settings as well as access other system settings.
Using the RESET & ADMIN, you can:
• Reset the TV to factory settings
• Force the system to power off and on
• Create a system pin code to lock
content and picture settings
• Enable or disable program offers and
suggestions
• Enable or disable anonymous debug
data for system performance.
• Start or stop the Store Demo Mode
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory defaults.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost! This
includes any wireless or picture settings
To restore the TV to its factory default settings:
1. Press the
Menu button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and press
OK. The SYSTEM menu is displayed.
3. Highlight
Reset & Admin and press OK. The RESET & ADMIN menu is
displayed.
4. Highlight
Reset to Factory Defaults and press OK. If you have
changed the set system PIN, enter it now.
The TV displays, “Select Reset to restore all TV settings to factory
defaults and clear all account information.”
5. Highlight
Reset and press OK.
6. Wait for the TV to turn off. The TV will turn back on shortly afterward
and the setup process will begin.
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light to
be on.
To turn the Power Indicator Light On or Off:
1. Press the
Menu button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and press
OK. The System menu is displayed.
3. Use the
Arrow buttons on the remote to highlight Reset & Admin
and press
OK. The Reset & Admin menu is displayed.
4. Highlight Power Indicator and press
OK.
5. Use the
Left/Right Arrow buttons to select On or Off.
Performing a Soft Power Cycle
A soft power cycle forces the TV to turn off then on again.
1. Press the
Menu button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and press
OK. The SYSTEM menu is displayed.
3. Highlight
Reset & Admin and press OK. The RESET & ADMIN menu is
displayed.
4. Highlight
Soft Power Cycle and press OK.”
5. Highlight
Yes and press OK.
6. The TV will turn off then on again
ADD USB Power“
Reset & Admin
Reset to Factory Defaults
Soft Power Cycle
Power Indicator On
System PIN Code
USB Power Always On
Viewing Data
VIZIO Privacy Policy
Store Demo
Back