3
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
To turn the Power Indicator Light On or Off:
1. Press the
MENU button on the remote. The on-screen menu is
displayed.
2. Use the
Arrow buttons on the remote to highlight System and
press
OK. The SYSTEM menu is displayed.
3. Highlight
Power Indicator and press OK.
4. Use the
Up/Down Arrow buttons to select On or Off, then
press
OK.
Adjusting the CEC Settings
The CEC function on your TV enables you to control devices
connected to HDMI (ARC) input with the included remote, without
any programming. Using CEC, your VIZIO TV remote can control:
• Power On/Off
• Volume
• Mute
Not all HDMI devices support CEC. See your device’s
user manual for details.
To enable, disable, or adjust CEC settings:
1. Set up your audio device and connect it to the HDMI-1(HDMI
Arc) input on the TV
2. On your audio device, select the HDMI ARC input
3. Press the
MENU button on the remote. The on-screen menu is
displayed.
4. Use the
Arrow buttons on the remote to highlight System and
press
OK. The SYSTEM menu is displayed.
5. Use the
Arrow buttons on the remote to highlight CEC and
press
OK. The CEC menu is displayed.
6. Highligh
CEC and press OK. Select a setting and then press OK.
• CEC - To use CEC, you must select Enable.
• Device Discovery - To determain if your device is
connected and supports CEC, select
Device Discovery and
then press
OK.
7. Press the
EXIT button on the remote.
33