The colors on the TV
don’t look right.
• Adust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings in the user manual.
• Reset the picture settings. See
Resetting the Picture Settings in the user manual.
• Check all cables to ensure they are securely attached.
I cannot return to
the Setup App.
• The on-screen menu has guided setup. Press
MENU
, then select
Help
>
System Reset
>
Start Setup Wizard
. Enter your PIN (default is
0000
). Select
Yes
.
There are black/gray
bars on the top/bottom/
sides of the picture.
• Set the TV to Wide or Zoom Mode. Press
MENU
, then select
Wide
. Highlight
Wide
or
Zoom
and press
OK
.
• Adjust the video settings of your external device (Blu-ray
™
or DVD player).
• If using the RGB (computer) input, ensure you are using a supported desktop resolution.
• Some television channels add black bars to the picture.
The TV does not respond
when I press buttons
on the remote control.
• Insert new batteries into the remote.
• Point the remote directly at the TV’s sensor.
• Ensure nothing is blocking the TV’s sensor. (The sensor is on the front of the TV, in the lower right corner.)
The TV displays “No Signal”
• Ensure your connected devices are turned on.
• Press the
INPUT
button on the remote and select the input to which your device
is connected (HDMI, Composite, etc).
