VIZIO M221NV User Manual
Version 5/13/2010
15
www.VIZIO.com
Remote Control Buttons
POWER (
)
—Press to turn the TV on from the Standby mode. Press it
again to return to the Standby mode.
CEC-Supported Buttons:
CEC needs to be set up and enabled for these buttons to work. See
CEC
on
page 45 for more information.
●
(Record)—Press to begin recording on your CEC-supported device.
(Pause)—Press to pause playback on your CEC-supported device.
►
(Play)—Press to start Playback on your CEC-supported device.
■
(Stop)—Press to stop playback/recording on your CEC-supported device.
(Previous)—Press to skip the previous track on your CEC-supported
device.
(Reverse)—Press to reverses playback on your CEC-supported device.
(Fast Forward)—Press to fast forward playback on your CEC-supported
device.
(Next)—Press to skip to the next chapter on your CEC-supported device.
EXIT
—Press to exit from open menus.
MENU
—Press to open the On-Screen Display (OSD) menu.
OK
—Press this button to display the Channel List. Press to confirm selections
for On-Screen Display (OSD) menus.
▲▼◄
►
—Press to navigate the OSD menu. They will also be used as value
settings when the slide bar is shown on the screen and option settings to turn
a feature off or on.
BACK
—Press to return to a previous OSD menu. Press repeatedly to close
the OSD.
GUIDE—
Press to display detailed program information when viewing a digital
TV program.
Color Buttons (Yellow, Blue, Red, & Green):
Yellow
—This button performs the same function as the “A” button on
your Cable or Satellite box when using the remote to control your pre-
programmed Cable/Satellite Box DVR.
Blue—
This button performs the same function as the “B” button on
your Cable or Satellite box when using the remote to control your pre-programmed Cable/Satellite
Box DVR.
Red—
This button performs the same function as the “C” button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.
Green—
This button performs the same function as the “D” button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.
VOL +/-
—Press to turn the volume up or down.
MUTE
—Press to turn the sound on and off.
LAST
— Press to recall the previously viewed channel.
CH +/-
—Press to change the channels up or down
Number Button Pad
—Press to select a channel or
enter a password.
