background image

3

22

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and 

built-in high-speed Wireless-N.

Connecting to a Wireless Network 

To connect to a wireless network 

whose network name (SSID) is being 

broadcast:

1.  Press the 

Menu button on the 

remote. The on-screen menu is 

displayed.

2.  Use the 

Arrow buttons on the 

remote to highlight Network and 

press 

OK. The 

NETWORK

 menu is 

displayed.

3.  If you do not see your wireless 

network displayed, highlight 

More 

Access Points and press OK. The 

WIRELESS  ACCESS  POINTS  menu, 

which is a list of available wireless 

networks, is displayed.

4.  Highlight the name of your 

wireless network (this is the 

network’s SSID) and press 

OK.

5.  Using the on-screeen keyboard, 

enter your network’s password, 

then highlight 

Connect and press 

OK.

6.  Press the 

Exit button on the 

remote.

If your TV is connected to a network with an Ethernet 

cable, you will not see the wireless network connection 

menu. You must unplug the Ethernet cable to set a 

wireless network connection.

Network

Wired Connection           Disconnected

Wireless Access Points

More Acess Points

Manual Setup

Hidden Network

Test Connection

Press OK to select your wireless access point

.

Back

Changing the Manual Setup Settings 

Advanced users can fine-tune the network settings using the Manual 

Setup feature.

To change advanced network settings:

1.  From the NETWORK menu, 

highlight Manual Setup and press 

OK. The MANUAL SETUP menu is 

displayed.

2.  To change the settings manually, 

use the Arrow buttons on the 

remote to highlight DHCP and then 

use the Left/Right Arrow buttons to 

change the setting to Off.

3.  Use the 

Arrow and OK buttons to 

adjust each setting:
•  IP Address - The IP address 

assigned to the TV.

•  Subnet Mask - The subnet Exit 2D
•  Default Gateway - Your network’s 

default gateway address.

•  Pref. DNS Server - Your preferred domain name server 

address.

•  Alt. DNS Server - Your alternate domain name server address.

4.  Use the Arrow buttons on the remote to highlight Save and press 

OK.

5.  Press the 

Exit button on the remote.

Manual Setup

DHCP                                                    Off

IP Address                                __.__.__.__

Subnet Mask                           __.__.__.__

Default Gateway                      __.__.__.__

Pref. DNS Server                     __.__.__.__

Alt. DNS Server                        __.__.__.__

RJ45 MAC                               0:0:0:0:0:0 

Wireless MAC                         0:0:0:0:0:0

Save

Cancel

Back

Finding MAC Addresses for Network Setup

The security settings on your router may require you to enter the

TV’s MAC address in the router’s settings.

To find the TV’s MAC address:

1. From the NETWORK menu, highlight Manual Setup and press 

OK

The MANUAL SETUP menu is displayed.

2. Find the MAC address for the TV at the bottom of the list. The MAC 

addresses for the connections in use are displayed:

•  RJ45 MAC - The Ethernet or RJ45 MAC address may be 

needed to set up your network when you have connected 

the TV to your network when you have connected the TV to 

your network with an Ethernet (Cat 5) cable.

•  Wireless MAC - The Wireless (WiFi) MAC address may be 

needed to connect your TV to your network with WiFi.

Summary of Contents for P55-F1




















































Reviews: