background image

iii

cord.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of un-isolated, dangerous voltage within the 

inside of your TV that may be of sufficient magnitude 

to constitute a risk of electric shock to persons.

•  Do not overload power strips and extension cords. 

Overloading can result in fire or electric shock. 

•  The wall socket should be installed near your TV and easily 

accessible.

•  Only power of the marked voltage can be used for your TV. 

Any other voltage than the specified voltage may cause fire or 

electric shock.

•  Do not touch the power cord during lightning. To avoid electric 

shock, avoid handling the power cord during electrical storms.

•  Unplug your TV during a lightning storm or when it will not be 

used for long period of time. This will protect your TV from 

damage due to power surges.

•  Do not attempt to repair or service your TV yourself. Opening 

or removing the back cover may expose you to high voltages, 

electric shock, and other hazards. If repair is required, 

contact your dealer and refer all servicing to qualified service 

personnel.

•  WARNING: Keep your TV away from moisture. Do not expose 

your TV to rain or moisture. If water penetrates into your TV, 

unplug the power cord and contact your dealer. Continuous use 

in this case may result in fire or electric shock.

•  Do not use your TV if any abnormality occurs. If any smoke or 

odor becomes apparent, unplug the power cord and contact 

your dealer immediately. Do not try to repair your TV yourself. 

•  Avoid using dropped or damaged appliances. If your TV 

is dropped and the housing is damaged, the internal 

components may function abnormally. Unplug the power cord 

immediately and contact your dealer for repair. Continued use 

of your TV may cause fire or electric shock.

•  Do not install your TV in an area with heavy dust or high 

humidity. Operating your TV in environments with heavy dust 

or high humidity may cause fire or electric shock.

•  Follow instructions for moving your TV. Ensure that the power 

cord and any other cables are unplugged before moving your 

TV.

•  To prevent injury, this apparatus must be securely attached to 

the floor/wall in accordance with the installation instructions.

•  When unplugging your TV, hold the AC/DC power adapter, not 

the cord. Pulling on the power cord may damage the wires 

inside the cord and cause fire or electric shock. When your TV 

will not be used for an extended period of time, unplug the 

power cord.

•  To reduce risk of electric shock, do not touch the connector 

with wet hands. 

•  Insert batteries in accordance with instructions. Incorrect 

polarities may cause the batteries to leak which can damage 

the remote control or injure the operator. Do not expose 

batteries to excessive heat such as sunshine, fire or the like.

•  If any of the following occurs, contact the dealer: 

        - The power cord fails or frays.  

        - Liquid sprays or any object drops into your TV.  

        - Your TV is exposed to rain or other moisture. 

        - Your TV is dropped or damaged in any way. 

        - The performance of your TV changes substantially.

•  This apparatus shall not be exposed to dripping or splashing 

and no objects filled with liquids, such as vases, shall be 

placed on the apparatus.

•  The mains plug or appliance coupler is used as the disconnect 

device, the disconnect device shall remain readily operable.

•  CAUTION: These servicing instructions are for use by qualified 

service personnel only. To reduce the risk of electric shock, 

do not perform any servicing other than that contained in the 

operating instructions unless you are qualified to do so.

•  The lightning flash with arrowhead symbol within an 

equilateral triangle is intended to alert the user to the 

presence of uninsulated DANGEROUS VOLTAGE within the 

product’s enclosure that may be of sufficient magnitude to 

constitute a risk of electrical shock to persons.

•  WARNING: Exposure to loud sounds can damage your hearing 

causing hearing loss and tinnitus (ringing or buzzing in the 

ears). With continued exposure to  loud noises, ears may 

become accustomed to the sound level, which may result 

in permanent damage to hearing without any noticeable 

discomfort.

•  Install the TV where it cannot be pulled, pushed or knocked 

over.

•  Do not allow children to hang onto the product.
•  Store the accessories (remote, batteries, etc.) in a location 

safely out of the reach of children.

•  The American Academy of Pediatrics discourages 

television viewing for children younger than two 

years of age.

•  WARNING: Never place a television set in an 

unstable location. A television set may fall, causing 

serious personal injury or death.

•  Many injuries, particularly to children, can be avoided by 

taking simple precautions such as:

•  Using cabinets or stands recommended by the 

manufacturer of the television set.

•  Only using furniture that can safely support the television 

set.

•  Ensuring the television set is not overhanging the edge of 

the supporting furniture. 

•  Not placing the television set on tall furniture (for example, 

cupboards or bookcases) without anchoring both the 

furniture and the television set to a suitable support.

•  Not placing the television set on cloth or other materials 

that may be located between the television set and the 

supporting furniture.

•  Educating children about the dangers of climbing on 

furniture to reach the television set or its controls.

•  If your existing television set is being retained and relocated, 

the same considerations as above should be applied.

•  WARNING: To prevent injury, this apparatus must be securely 

attached to the floor/wall in accordance with the installation 

instructions. 

h

h

Summary of Contents for P55-F1




















































Reviews: