background image

D

the Supplementary Procedures for Consumer-Related Disputes applies, 

then you are entitled to recover attorneys’ fees as the arbitrator may 

determine.

The dispute will be governed by the laws of the state or territory in which 

you resided at the time of your purchase (if in the United States).  The 

place of arbitration will be Irvine, California, or your county of residence 

(if in the United States).  The arbitrator will have no authority to award 

punitive or other damages not measured by the prevailing party’s actual 

damages, except as may be required by statute. The arbitrator will not 

award consequential damages, and any award will be limited to monetary 

damages and will include no equitable relief, injunction, or direction to 

any party other than the direction to pay a monetary amount.  Judgment 

on the award rendered by the arbitrator will be binding and final, except 

for any right of appeal provided by the Federal Arbitration Act, and may 

be entered in any court having jurisdiction. Except as may be required by 

law, neither you nor VIZIO nor an arbitrator may disclose the existence, 

content, or results of any arbitration under this warranty without the 

prior written consent of you and VIZIO. 

ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, 

WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU 

AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY 

DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY 

GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER 

PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.

NO  ARBITRATION  OR  PROCEEDING  WILL  BE  JOINED,  CONSOLIDATED, 

OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING 

WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH 

ARBITRATION OR PROCEEDING.

Exceptions to Binding Arbitration Agreement and Class Action Waiver

IF  YOU  DO  NOT  WISH  TO  BE  BOUND  BY  THE  BINDING  ARBITRATION 

AGREEMENT  AND  CLASS  ACTION  WAIVER,  THEN:  (1)  you  must  notify 

VIZIO in writing within sixty (60) days of the date that you purchased the 

product; (2) your written notification must be mailed to VIZIO at 39 Tesla, 

Irvine, CA 92618, Attn: Legal Department; and (3) your written notification 

must include (a) your name, (b) your address, (c) the date you purchased 

the product, and (d) a clear statement that you wish to opt out of the 

binding arbitration agreement and class action waiver.

In addition, you may pursue a claim in small claims court in your county of 

residence (if in the United States) or in Orange County, California. In such 

case the provisions of the section titled “Binding Arbitration Agreement; 

Class Action Waiver (U.S. Residents)” will not apply.

Exclusions and Limitations

TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE 

NO  EXPRESS  WARRANTIES  OTHER  THAN  THOSE  DESCRIBED  ABOVE. 

ANY  IMPLIED  WARRANTIES,  INCLUDING  ANY  IMPLIED  WARRANTY  OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE 

LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. 

SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW 

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY 

NOT APPLY TO YOU.

VIZIO  WILL  NOT  BE  RESPONSIBLE  FOR  LOSS  OF  USE,  LOSS  OF 

INFORMATION  OR  DATA,  COMMERCIAL  LOSS,  LOST  REVENUE  OR 

LOST  PROFITS,  OR  OTHER  INDIRECT,  SPECIAL,  INCIDENTAL  OR 

CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS 

ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW 

THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY 

TO YOU.

IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES 

RESULTING  FROM  ANY  CAUSE  WHATSOEVER  (INCLUDING  VIZIO’S 

NEGLIGENCE,  ALLEGED  DAMAGE,  OR  DEFECTIVE  GOODS,  NO  MATTER 

WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, 

AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR 

OR  REPLACE  YOUR  PRODUCT,  OR  REFUND  ITS  PURCHASE  PRICE.    AS 

NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION 

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies

This warranty gives you specific legal rights, and you may also have other 

rights, which vary from state to state and province to province. This 

warranty applies to the greatest extent permitted by applicable law.

General

No employee or agent of VIZIO may modify this warranty. If any term of this 

warranty, other than the class action waiver, is found to be unenforceable, 

that term will be severed from this warranty and all other terms will 

remain in effect. If the class action waiver is found to be unenforceable, 

then the entire section titled “Binding Arbitration Agreement; Class Action 

Waiver (U.S. Residents Only)” will not apply. This warranty applies to the 

maximum extent not prohibited by law.

Changes to Warranty

This warranty may change without notice, but any change will not affect 

your original warranty. Check www.vizio.com for the most current version.

49

Summary of Contents for P55-F1




















































Reviews: