VIZIO RP56 User Guide
040330 30
PICTURE ADJUST – PC Modes
CONTRAST
– Adjusts the contrast of the picture.
BRIGHTNESS
– Adjusts the brightness of the picture.
Users may need to readjust the brightness after the DLP
TV warms up.
H
POSITION
– Adjusts the horizontal screen position.
V
POSITION
– Adjusts the vertical screen position.
AUTO
CONFIG
– Automatically adjusts to the best
settings.
ADC
CLOCK
– Removes any vertical distortion and
clears or sharpens the displayed characters.
ADC
PHASE
– Removes any horizontal distortion and
clears or sharpens the displayed characters.
WIDE
FORMAT
- Adjusts the screen width to
STRETCH, CENTER, PANORAMIC, or ZOOM viewing
mode.
PIP SETUP
PIP STYLE
– Turns PIP mode on or off, or chooses one
of the following pre-set modes:
SPLIT
– The screen is divided in half. The left
side is the main picture and the right side is the
sub-picture.
POP
– The screen is in the 16:9 mode and
divided in half. The left side is the main picture
and the right side is the sub-picture.
MAIN + 3
– The main picture is on the left and
there are three small sub-picture windows on the
right.
MAIN + 7 –
The main picture is on the bottom
left and there are four small sub-picture windows
across the top and three small sub-pictures on
the right.
SCAN
– The screen is divided into 12 small sub-
pictures.
WIDE
– Changes the sub-picture size. Choose between
4:3 and 16:9.
SIZE
– Changes the size of the sub-picture.
H
POSITION
– Moves the sub-picture left or right.
V
POSITION
– Moves the sub-picture up or down.
TRANSPARENCY
– Adjusts the sub-picture
transparency.
