English - 20
Function
LED Behavior
Description
TV Remote
Press the
Next/Previous button to enable/disable VIZIO TV Remotes. When enabled
(On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV
Volume Up button) and control volume.
Program Remote
−−
Press the
Next/Previous and Play buttons to toggle and select and program your TV
remote to control the
Volume Down, Volume Up, and Mute functions on your sound
bar. See the
Program Remote section for more information.
Eco Power On/Off
Press the
Next/Previous button to enable/disable Eco Power Mode. When enabled
(On), the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn off when no audio signal is detected. Off disables this feature.
Note: If you would like to cast content without the need to manually turn on the
sound bar, set this function to OFF.
Speaker Test
—
Press the
Play/Pause button to activate the speaker test function. A voice will begin
calling out each speaker beginning with
left front. (Left Front, Center, Right Front,
Right Rear, Left Rear, and subwoofer-white noise) If any of these are missing, check
the connection and run the speaker test function again.
Link
Press the
Next/Previous and Play buttons to select and confirm enabling or disabling
Link Mode on your sound bar. Link Mode allows the VIZIO SmartCast App to reconnect
the sound bar to Wi-Fi or paired bluetooth devices in the event of a lost connection or
if a new device is being paired.
Reset
−−
Press the
Next/Previous and Play buttons to select and reset your remote and sound
bar to the factory default settings. All paired Bluetooth devices will be unpaired. All
programmed IR remotes will also be removed. See the
Reset to Factory Default Set-
tings section for more information.
When a Dolby
Digital Plus or DTS
signal is detected.
Dolby Digital and DTS are available on the
Coaxial In, HDMI ARC, HDMI In, and
Digital Optical Audio In inputs. Dolby Digital Plus is only available on HDMI
In input. When a Dolby Digital or DTS signal is detected, the Dolby Digital Plus
(White) / DTS (Amber) indicator LED will light up for 5 seconds before fading away.
When the soundbar
successfully
connects to Wi-Fi.
When Wi-Fi is succesfully set up via the VIZIO SmartCast app or through an ethernet
connection, the blue indicator LED will light up to confirm a successful connection.
Prg Remote
EcoPwr
VZtv Rmt On
TV Remote On
TV Remote Off
Eco Power On
Eco Power Off
Dolby Digital Plus and
DTS Indicator LED
Wi-Fi Indicator LED
Spkr Test
Reset No
Link Yes
Single light with sound
upon confirmation
