English - 15
8
Remove the battery cover by gently
sliding it away from the remote.
9
Insert the included batteries and gently
slide the battery cover back into place.
10
Turn on your TV and sound bar. The sound bar will automatically
begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling
in pairs through inputs until an audio source is detected.**
You can press the
INPUT button to switch between audio
sources. For example, if you connected your TV to AUX, set the
sound bar to AUX.
Input
Power
Top
Top
Tip:
Pressing the
INPUT button will stop
the auto detect function.
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
When needed, VIZIO recommends replacing
the batteries that came with this remote with
two, new Duracell ‘AAA’ alkaline batteries.
