The remote
isn’t working.
• Make sure the plastic tab has been removed from the battery compartment.
• Replace the remote battery with a new one.
• Point the remote directly at the Sound Bar when pressing a button.
• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the
streaming application. (e.g., a music streaming app may not support the Back/Fast Rewind button.)
There is no sound
coming from the
Subwoofer
• If the ligts on the Subwoofer are in a slow blink pattern, you will need to pair the Subwoofer with the
Sound Bar. See Re-Linking the Subwoofer and Sound Bar on page 16.
• Move the Subwoofer closer to the Sound Bar
• Turn the Subwoofer power switch to
ON
.
• To conserve power, the Subwoofer will automatcially enter a low power state when not in use. it may
bake up to 20 seconds for the Subwoofer to link after the Sound Bar is turned on.
How do I listen to
SRS TruSurround or
Dolby Digital?
• To activate SRS TSHD, press the
Menu
button on the remote and use the arrow keys to scroll to the TSHD
screen to toggle between on and off.
• To listen to Dolby Digtal, your device must be playing content in Dolby Digital format. Dolby Digital is
only available over Digital Coaxial or Digital Optical.
I would like to adjust
the sound on the
Subwoofer and the
Sound Bar.
• Adjust the bass and trebel levels using the remote
• Try enabling/disabling SRS TruSurround.
I want to return
my Sound Bar to
factory settings.
• Press and hold the
Power
,
Volume Up
, and
Volume Down
buttons for 10 seconds to return your Sound
Bar to its factory default settings.
