VIZIO VF551XVT User Manual
Version 7/17/2009
35
www.VIZIO.com
h. The
Tuner
screen will be
displayed. If you are using Cable
Service (not a box), press the
▼
button on the remote control to
choose CABLE.
i. Press
the
OK
button on the
remote control to go to the next
screen.
j. The
Channel Scan
screen will be
displayed; default choice is Scan.
Note:
If a set-top box from your cable or satellite
service company is being used you do not need to
scan for channels. Press the
OK
button on the
remote control and select
Skip Scan
.
k. Press
the
OK
button on the
remote control to start the search
for available channels. The screen
will show the progress of the
search for Analog (NTSC) and
Digital (ATSC) channels.
Note:
If you select
Skip Scan
, you can scan
channels at a later time by selecting the TV input,
then going to the Menu and selecting the Auto
Search option in the TV menu.
Refer
to www.antennaweb.org
to get information
about availability in your area, type of antenna and
in which direction to point your antenna. The
channel availability through cable depends upon
which channels your cable operator supplies DTV
digital content in Clear QAM; consult your cable
operator for more information.
l. When finished, the
Complete
screen will be displayed to inform
you that the HDTV has completed
the Initial Setup. Press the
OK
button on the remote control to
exit and begin watching TV.