VIZIO VF551XVT User Manual
54
www.VIZIO.com
My Codes
DVD Player
Home Theater
Cable Box
Satellite Box
VCR
Other
Other
Other
Programming your Cable or Satellite Set-Top Box
1. Turn on the Cable or Satellite Set-Top Box.
2. Press and release the
CABLE
button on the remote control.
3. Press and hold the
SET
button until the
LED flashes twice.
4. Find the programming code for your Cable
or Satellite Set-Top Box in the code list
below and enter it using the number buttons.
If the code is accepted, the LED flashes
twice after the last digit is entered. If the
LED does not flash twice, repeat Steps 2
through 4 with the next code listed.
5. Point the remote control at the Cable or
Satellite Set-Top Box and press the
POWER
button. The Cable or Satellite Set-
Top Box will turn off. If the Cable or Satellite
Set-Top Box does not turn off, repeat Steps
2 through 4 with the next code listed for the
component and manufacturer.
Notes:
If the codes do not work or your brand is not listed, see “Searching for Component Codes.”
Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.
Searching for Component Codes
If you cannot find the manufacturer in the component list or the program code does not work, you can use
the remote control to search for the correct component code.
1. Turn on the component.
2. Press the matching component button on the remote control.
3. Press and hold the
SET
button until the LED flashes twice.
4. Press
9 9 1
. The LED flashes twice.
5. Point the remote control at the component and then alternate between pressing the
POWER
button and the component button on the remote control until the component turns off. If the
component still does not respond.
