VIZIO VO47L FHDTV10A User Manual
Version 11/7/2007
10
www.VIZIO.com
1.3
1.3
1.3
1.3
Rear Panel Connections
Rear Panel Connections
Rear Panel Connections
Rear Panel Connections
1.
AC IN
– Plug-in the supplied AC Power Cord here.
2.
SERVICE
– This custom communication port is for factory service only.
Use of this input for
any purpose other than factory authorized service will void the manufacturer’s
warranty of this equipment.
3.
HDMI 1
– Connect the primary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection.
4.
HDMI 2
– Connect the secondary source for digital video such as a DVD multimedia player or
set top box through this all digital connector. The white color band on the rear of the TV
indicates this connection.
5.
HDMI 3
– Connect a third source for digital video such as a DVD multimedia player or set top
box through this all digital connector. The white color band on the rear of the TV indicates
this connection.
6.
HDMI 4
– Connect a fourth source for digital video such as a DVD multimedia player or set
top box through this all digital connector. The white color band on the rear of the TV
indicates this connection. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the Analog Audio output of the device to the L+R AUDIO here. .
Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.VIZIO.com
or by calling 888-VIZIOCE (888-849-4623).
7.
RGB PC
– Connect the video and audio from a computer here. The blue color band on the
rear of the TV indicates this connection. A cable with a 1/8” mini plug stereo connector at the
end connecting to the TV is needed if sound is also transmitted with this signal.
8.
COMPONENT 1 (YPb/CbPr/Cr with Audio L/R)
– Connect the primary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The green color band on the rear of the TV indicates this connection.
9.
COMPONENT 2 (YPb/CbPr/Cr with Audio L/R)
– Connect the secondary source for
component video devices such as a DVD Player or set top box here. From left to right, use
green for Y, blue for Pb (or Cb), red for Pr (or Cr), white for left audio and red for right audio
inputs. The purple color band on the rear of the TV indicates this connection.
10.
AV1 IN
– Connect the primary source for composite video devices, such as a VCR or video
game. Use the white and red connectors to connect the external audio from the same source.
The yellow color band on the rear of the TV indicates this connection.
11.
DTV
– Connect to an antenna or digital cable (no Cable Box) for Digital TV.*
1
7
9
5
11
12
2
3
4
6
8
14
10
13
