VIZIO VO47L FHDTV10A User Manual
Version 11/7/2007
12
www.VIZIO.com
1.4
1.4
1.4
1.4
VIZIO Universal Remote Control
VIZIO Universal Remote Control
VIZIO Universal Remote Control
VIZIO Universal Remote Control
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four
different components. The remote button functions are explained on the following pages.
Remote LED
– Blinks when the remote operates.
This button starts all programming of the Remote Control.
Press this button to turn the TV on from the Standby mode.
Press it again to return to the Standby mode.
This button selects a programmed DVD player.
This button selects a programmed Audio Receiver/Amp/Home
Theatre System.
This button selects a programmed cable TV set-top box or a
satellite TV set-top box.
This button has been pre-programmed to select the codes to
operate the VIZIO HDTV.
Use these buttons to select a channel or enter a password.
This button allows the user to cycle through the inputs.
This DASH button is for the DTV mode. When selecting a digital
channel directly use this button for the separation of main and sub-
channels. For example, channel 28-2 would be selected by the
button sequence 2 8 DASH 2.
NOTE: This is a programmable remote supporting up to 4 devices (see TV,
VCR, CABLE, DVD buttons at the top of the remote). If the remote is not
working with your VIZIO TV, press the TV button on the remote to set the
functions back to TV.
