VIZIO VUR5 Universal Remote User Manual
Version 8/8/2008
www.vizio.com
3
1.0 VIZIO Universal Remote
1.0 VIZIO Universal Remote
1.0 VIZIO Universal Remote
1.0 VIZIO Universal Remote Control
Control
Control
Control
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different
components. The remote button functions are explained on the following pages.
SET
– This button starts all programming of the Remote Control.
Remote LED
– Blinks when the remote operates.
POWER
– Press this button to turn the TV on from the Standby mode. Press it again to
return to the Standby mode.
TV
– This button has been pre-programmed to select the codes to operate a VIZIO TV.
VCR
– This button selects a programmed VCR.
CABLE
– This button selects a programmed cable TV set-top box or a satellite TV set-top
box.
DVD
– This button selects a programmed DVD player.
Number Button Pad
– Use these buttons to select a channel or enter a password.
INPUT
– This button allows the user to cycle through the inputs.
- / ENTER
– This button works as a DASH button in the DTV mode. When selecting a digital
channel directly use this button for the separation of main and sub-channels. For example,
channel 28-2 would be selected by the button sequence 2 8 ENTER 2.
CH (+ or -)
– These buttons change the channels up or down.
LAST
– This button recalls the previously viewed channel.
MUTE
– This button turns the sound on and off.
VOL (+ or -)
– These buttons turn the volume up or down.
MENU
– Use this button for the On-Screen Display (OSD) menus.
INFO
– This button displays the image and system information display.
GUIDE
– This button displays program information.
Note: this button is only functional for
DTV.
EXIT
– This button exits the On-Screen Display (OSD) menus.
- These buttons navigate the On-Screen Display (OSD).
OK
– Use this button to select your chosen option in On-Screen Display (OSD) menus.
