VIZIO VUR8 Universal Remote User Manual
Version 2/17/2009
7
www.VIZIO.com
1.1.4
1.1.4
1.1.4
1.1.4 Cleaning the Housing and Remote Control
Cleaning the Housing and Remote Control
Cleaning the Housing and Remote Control
Cleaning the Housing and Remote Control
1.
Use the VIZIO soft cloth (included) for cleaning.
2.
If the housing or remote control is seriously contaminated, use a soft cloth moistened with
diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to
prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
1.2
1.2
1.2
1.2
Programming the VIZIO Universal Remote Control
Programming the VIZIO Universal Remote Control
Programming the VIZIO Universal Remote Control
Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different pieces of equipment including your
VIZIO HDTV. Listed below are the steps for programming your VCR, Cable Box and DVD Player.
1.2.1
1.2.1
1.2.1
1.2.1 Programming for VCR
Programming for VCR
Programming for VCR
Programming for VCR*
*
*
*
*Note: The VIZIO Universal Remote Control does not feature a “VCR” device button, but you may
program any of the device buttons to act as a VCR device selector, such as DVD, AUDIO or CABLE if
you are not using one of those devices.
1. Manually turn on the VCR.
2. Press the button on the remote control which you have selected to control the VCR.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your VCR in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
5. If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the device
and manufacturer.
6. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
1.2.2
1.2.2
1.2.2
1.2.2 Programming for Cable Set
Programming for Cable Set
Programming for Cable Set
Programming for Cable Set-
--
-Top Box
Top Box
Top Box
Top Box
1. Manually turn on the Cable Box.
2. Press the CBL button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the device and
manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
Note:
a)
If your VCR does not respond, try all the codes for your VCR brand. If the codes do not
work, or your brand is not listed, see “Searching for Device Codes.”
b)
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
Note:
a)
If your Cable Set-Top Box does not respond, try all the codes for your brand. If the codes
do not work, or your brand is not listed, see “Searching for Device Codes.”
b)
Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
