VIZIO VXW20L HDTV10A User Manual
Version 1/3/2008
25
www.VIZIO.com
2.8
Connecting a PC Computer
1.
Turn off the power to the HDTV and PC
Computer.
2.
Connect a 15-pin D-Sub RGB (VGA) cable to
the RGB output of your pc computer and the
other end to the RGB PC input (blue area) at
the rear of the HDTV.
3.
Connect the Audio Out on your pc computer to
the RGB PC Audio input (blue area) at the rear
of the HDTV.
4.
Turn on the HDTV and PC Computer.
5.
Select RGB using the INPUT button on the
remote or side of the HDTV, or directly by pressing the RGB button on the Remote Control.
2.8.1
Preset PC Resolutions
Resolution Refresh (Hz) H.Freq (kHz) V.Freq (Hz) H.Sync V.Sync Pixel Freq (MHz)
640x480
60
31.5
59.94
N
N
25.175
640x480
75
37.5
75.00
N
N
31.500
720x400
70
31.46
70.08
N
P
28.320
800x600
60
37.9
60.317
P
P
40.000
800x600
75
46.9
75
P
P
49.500
800x600
85
53.7
85.06
P
P
56.250
1024x768
60
48.4
60.01
N
N
65.000
1024x768
75
60.0
75.03
P
P
78.750
*1366x768
60
47.7
60.00
P
N
85.500
NOTES: N = Negative, P = Positive, * = Primary (Native) Mode
Note:
a)
For the best picture quality when connecting a pc computer through RGB
PC, set your pc computer timing mode to VESA 1366x768 at 60Hz. Please
refer to the pc or graphic card’s user guide for additional information on how
to set the timing mode and the video output requirements of the product.
b)
A RGB (VGA) cable and stereo mini jack cable are not included and can be
purchased at an electronics store.
