background image

12

13

VIZIO Remote Control Precautions

The remote control should be kept dry and away 
from heat sources. Avoid humidity.

If the Component responds erratically to the 
remote control or does not respond at all, check 
the batteries. If the batteries are low or exhausted, 
replace them with fresh batteries.

When not using the remote control for a long 
period of time, remove the batteries.

Do not take the batteries apart, heat them, or throw 
them into a fi re.

Do not subject the remote control to undue 
physical stress, such as striking or dropping it.

Cleaning the Remote Control

1. Use a soft cloth for cleaning.
2. If the remote control is seriously contaminated, 

use a soft cloth moistened with diluted neutral 
cleaner to clean the display. Wring water out of 
the cloth before cleaning to prevent water from 
penetrating into the housing. 

Troubleshooting

1. Remote control does not work:

o   Point the remote control directly at the 

remote sensor on your TV.

o   Remove any obstacles between the remote 

control and the remote sensor.

o   Replace dead batteries with new ones.
o   Press the DTV button on the top of the 

remote to return to the TV mode.

Maintenance & Troubleshooting

2. The remote control is not working with my 

devices.

o  Move closer to the device. 
o  Point the remote control directly at the 

remote sensor on your device.

o  Remove any obstacles between the remote 

control and the remote sensor.

o  Replace dead batteries with new ones.
o  Make sure you have pressed the correct 

device button at the top of the remote.

3. The remote control does not work with my 

device even after programming it.

o  Set the remote control code correctly. If the 

code that is listed fi rst for your device does 
not work, try all the codes for your device 
in the order in which they are listed in the 
supplied Code List.

Telephone & Technical Support

Products are often returned due to a technical 
problem rather than a defective product that may 
result in unnecessary shipping charges billed 
to you. Our trained support personnel can often 
resolve the problem over the phone. For more 
information on warranty service or repair, after 
the warranty period, please contact our Support 
Department at the number below. Customer 
support and quality service are integral parts of 
VIZIO’s commitment to service excellence.

For technical assistance contact our VIZIO 
Technical Support Department via email or phone.
Email: techsupport@vizio.com (877) 698-4946 
Fax: (949) 585-9563 Hours of operation: Monday - 
Friday: 6 am to 9 pm Saturday – Sunday: 8 am to 
4 pm Please have your VIZIO model number, and 
date of purchase available before you call VIZIO.

VIZIO
39 Tesla
Irvine, CA 92618, USA
Telephone: (949) 428-2525 Fax: 949-585-9514
Web: www.vizio.com

XRU9M OM 2-6-10.indd   12-13

XRU9M OM 2-6-10.indd   12-13

2/6/2010   1:51:44 PM

2/6/2010   1:51:44 PM

Summary of Contents for XRU9M










Reviews: