background image

13. MANUFACTURER’S WARRANTIES

Guarantee service life

 – 10 

years from the day of purchase

 

for the hull and 24 months from the day 

of purchase for the components and paint-and-laquer coating. During the warranty period 
manufacturer performs the maintenance free of charge or replaces the boat if the vessel has got a 
marking plate on it and if the client presents the Vessel Datasheet, and if all the operation, 
transportation and storage conditions have been observed. Manufacturer is not responsible for and 
does not repay for the defects that appeared through user’s or trading company’s fault during careless 
transportation, improper storage and operation, due to mechanic damage of the boat or inobservance 
of the requirements of the present Datasheet. The wind-screen is made of polycarbonate (acryl), its 
peculiarities do not allow any contact with chemical solvents (acetone, benzine

diluents and other 

aggressive chemical substances

). The damage caused to the product as the result of such contact is 

not a warranty event. 

Other interior and boat construction elements made of plastic or composite 

materials must not make contact with chemical solvents

. Manufacturer is not responsible for any 

consequences, including 

harm done to the third persons, if these consequences came as the result 

of noncompliance with operation, transportation and storage rules

use of the boat for purposes 

other than intended, as well as any changes made in the construction of the boat or its equipment 
without consent of manufacturer. All the changes in the boat’s construction, equipment or tooling 
as well as removal of any faults or damage must be consented with manufacturer in written form. 
The absence of such consent deprives client of the right to get warranty repair.  

Inspection of a finished product

Before being handed over to the buyer each motorboat undergoes acceptance testing that includes:  
appearance and external surface inspection, welds quality inspection and composition check.

For warranty repair contact us

:

163A Atbrīvošanas alley, Rezekne, LV-4604, Latvia 

Phone: +37129419709, 

www

.vizboat.com 

By that we,

 

FISHBOAT

” LLC

, 9B Raiņa street, Valmiera, LV

-

4201, Latvia 

confirm that CE Certification was performed in accordance with Directive 2013/53/EU.

 

 

ENG

15

Summary of Contents for 440 CS



















Reviews: