S
ecti
on
7
–
Ins
talling th
e Car
d
Reader O
pt
ion
Operation Manual
VKI Publication #202377-001
112
3.
Partially
insert the two lower screws at the card reader opening on the front of the
door.
Do not tighten these screws at this point.
4.
Pass the card reader wiring to the rear of the door (through the card reader opening),
and then slide the bottom of the card reader onto the two partially inserted screws.
Once done, secure the top of the card reader with two screws, and then tighten the
two lower screws to secure the bottom of the card reader.
5.
Install the appropriate cover (for card reader being used) onto the front of the door, and
secure it in place with a screw from the inside of the door (at top center of card reader
opening).
Cover for Nayax
®
:
202677-002
Cover for Coinco
®
:
202677-003
Cover for USATECH
®
:
202677-004