Eccellenza Pod
Operation Manual
4
Safety Information
Your safety is very important to us. It is imperative that you read and understand this
safety information before proceeding with the installation and operation of this coffee
maker.
This coffee maker is designed for indoor use ONLY and must never be installed
outdoors.
The installation of this equipment must comply with all municipal,
state/provincial, and federal electrical and plumbing codes.
Installation and servicing of this equipment must only be performed by
qualified personnel. Do not attempt to install or service this equipment if you
are not qualified as it may result in personal injury. There are no user-
serviceable parts inside the equipment.
This equipment must be installed in a location with an ambient temperature
between 5°C-35°C (40°F-95°F).
The main water supply pressure must be between a minimum of 20psi and a
maximum of 100psi.
This equipment must be positioned so that the wall plug and the main power
switch are both easily accessible.
Do not connect the coffee maker to a voltage supply other than the voltage
indicated on the serial number decal.
Do not immerse this coffee maker or any part of this equipment in liquid.
Do not install the equipment in an area where water spray is present.
This coffee maker must be installed securely on a level surface. If it does not
appear to be a stable location, select another installation location.
Keep hands clear of the dispensing area at the front of the coffee maker.
Liquids being dispensed are extremely hot and can cause severe burns.
Never disconnect the coffee maker by pulling on the service cord, and never
use the coffee maker if the service cord is damaged.
If the service cord is damaged, it must be replaced with a new service
cord that is available from your distributor or the manufacturer of this
equipment.
This equipment must be used specifically for the purpose for which it
is designed. The manufacturer is not responsible for damage or injury
resulting from improper use of this equipment.
