Replacing Components
Eccellenza Pod
28
9.
To remove the Powder 1 motor, pull it towards you and twist it slightly clockwise. It
may be necessary to turn it into the hot water hose to get the motor coupling and
coil to clear the wall.
10.
To install the new motors, follow this procedure in the reverse order.
11.
After the new motors are mounted onto the wall, reseat the water tank back into its
proper position.
12.
Inspect the hoses on the two outlet valves to make certain they are properly
secured to the valves.
13.
Inspect the outlet end of the hot water and powder hoses to make certain they are
properly secured to their respective component.
14.
When reconnecting the inline power wiring connectors to their motors, make certain
the blue wires are on the powder 1 motor and the red on the powder 2 motor.
15.
Test the machine to make certain everything is functioning properly.