Eccellenza Pod
Safety Information
5
If the service cord is damaged, it must be replaced with a new service
cord that is available from your distributor or the manufacturer of this
equipment.
This equipment uses low voltage DC powered valves and motors. Do not
connect components to a voltage supply other than the voltage indicated on
their specifications.
Never attempt to override the safety features incorporated into the
equipment. They are there for your protection and should never be bypassed
under any circumstances.
Always switch the power off and disconnect the service cord when cleaning the
interior of the coffee maker. Components inside the coffee maker can cause
electrical shock resulting in personal injury.
If the coffee maker is not working properly or appears to have a fault, switch
off the power, disconnect the service cord and call an authorized technician
immediately for service. Only qualified personnel should perform service
on this equipment.
Use caution when servicing the water heater or the outlet valves as they may
be extremely hot and can cause severe burns.
Use caution when working inside the coffee maker as there may be sharp
edges on some components that can cause cuts.
To prevent electrical shock, remove all jewelry (rings, watches, etc.) when
servicing the coffee maker.
Do not allow children to access this equipment. They are not aware of the
potential dangers that exist.
Never use ammonia based cleaners on machine surfaces as they will become
discolored and/or damaged permanently. Use milder cleaning products, such
as dish soap.
Unauthorized modifications made to this coffee maker can
result in serious personal injury and/or damage to the
equipment, and voids all warranties and certifications.
