8
Arm Attachment Instructions
Installation Steps:
1.
Slide the Grain Mill Arm or the Food Strainer Arm into the slot on the
flat end of the motor (see Fig.1).
2.
When pushed all the way in, snap the “U” shaped clip into the
corresponding slot on the motor until it snaps securely into the body
without moving (see Fig. 2).
Fig. 1
1
2
3
Fig. 2
Removal Steps:
(see
illustrations to the right)
1.
Depress tab on arm and
hold it down.
2.
Push other end of the
arm to pop it out.
3.
Pull the arm out.
Grain Mill
Food Strainer
