5
Cleaning and User Maintenance
To ensure The Grain Mill works properly at all times, please follow the care
and handling instructions below:
•
When you receive The Grain Mill, dismantle all parts and wipe them
off using a damp cloth to remove any residue from manufacturing and
packaging.
•
Small parts are easily lost, so be sure to handle them with care.
•
After each use, The Grain Mill can be easily cleaned with a damp, soft
brush or soft cloth.
•
If thorough cleaning is necessary, hand wash The Grain Mill in warm
water and dry all parts thoroughly before reassembly.
•
Do not leave any part of The Grain Mill soaking in water.
•
Do not clean any part of The Grain Mill in a dishwasher.
Helpful Tips
1.
The first time you use The Grain Mill, be sure to dispose of the
first 2-3 cups of grain which has been ground, as it may contain
metal residue from the manufacturing process.
2.
We suggest always starting The Grain Mill adjusted to the finest setting.
However, if you started grinding on a coarse setting and need to adjust
back to fine, then turn the handle counter-clockwise for 2-3 full
rotations while tightening the adjustment knob to the desired setting.
3.
Grind white rice through The Grain Mill to remove any build up
caused by normal use.
4.
Not recommended for grinding popcorn kernels. They are very hard
and it will be very difficult to crank the handle. If using the optional
motor (sold separately), grinding popcorn kernels can damage the
motor.
Scan to see The Grain Mill Assembly & Use Video:
VKPbrands.com/videos.php?v=the-grain-mill-use
Summary of Contents for Kitchen Crop VKP1248
Page 1: ...Instruction Manual THE GRAIN MILL ...
Page 11: ...11 Notes ...
