6
Mounting Instructions
Choose a firm, sturdy surface when mounting The Grain Mill. The best
surfaces are built-in counter tops and heavy tables, like a dining room table.
These types of surfaces ensure The Grain Mill can remain in place while
grinding.
Place The Grain Mill body on the edge of the mounting surface. Open the
clamp screw as wide as it will go by turning counter-clockwise. Then push
the clamp assembly forward into the slot on the mill body, so the body and
clamp assembly sit flush with the edge of the surface. Twist the clamp
screw clockwise until it is tight and The Grain Mill is securely in place (see
mounting diagrams below).
Mounting surface
is too round or
oddly shaped.
Mounting surface
is too thin.
Mill body and
clamp assembly
are not flush with
mounting surface.
Mill body is flush
but clamp
assembly is not
pushed flush with
mounting surface.
Incorrect
Correct
Summary of Contents for Kitchen Crop VKP1248
Page 1: ...Instruction Manual THE GRAIN MILL ...
Page 11: ...11 Notes ...
