8
GRAPHITE 2
.
Assembling gide
pic. 12
pic. 13
pic. 14
Glue the plywood bars for servos mounting into the slots. The back slot is wider to make it possible to
increase the window if you use bigger servos (max size - 16mm thick e.g. MPX Micro Speed Digi).
Cut the height of the plywood bars to get a 1mm space between the servo horn and the back surface of the
nearby servo to fix the plug. Pay attention that the center of the tongue is to be situated between the
maximum outstanding both servos parts. Screw the servos and check that they don't contact the nose cone.
