Manual time setting:
-
Press and hold down the “
SET
”
button for 3 seconds, the Hour displays starts to flash. Now use
“
▲
”buttons to set the correct hour.
-
Press “
SET
”
to confirm your setting, the Minute display
s starts to flash. Now use “
▲
”buttons to
set the correct minute.
-
Press “
SET
”
to confirm your setting, the AM/PM
hour mode display. Now use “
▲
”buttons to set
the correct AM/PM hour mode.
-
Press “
SET
”
to confirm your setting and to end the setting procedures, enter the clock mode.
Ice warning:
-
If temperature recorded falls between -3
°C to
+1
°C (
26.6
°F to
33.8
°F), LCD display the “
“
indicator will flash. it will stop flashing once the temperature is out of this range.
Temperature:
-
in temperature mode, short pressing
“
”
to switch indoor & outdoor temperature
display,the Hi.& Lo. record will display accordingly.
-
long pressing
“
“
button for 3 seconds to switch the time mode and Hi/Lo record mode
freely.
°C/°F temperature display:
-
The tempe
rature is displayed either in °C or °F. Briefly pressing the “
“button allows
you to switch between the individual models.
Temperature trend:
-
The product will scan and display the current temperature each 30 seconds.
-
The current temperature will be compared with last record: the up arrow
“
“
will display if 1
℃
increasing; the down arrow
“
“
will display if 1
℃
falling. No arrow display if the temperature
changing /-1
℃
in one hour.
F.Y.I.:
-
If the temperature reading is below
ranges
, the
LL.L
will be displayed. If the
temperature reading is
above
ranges
, the
HH.H
will be displayed.
