Caution! Always pay attention to Chapter 11. "Installation" in the User's manual.
The aperture in the wall must be able to accommodate a fume extraction hose
with a diameter of 150 mm. (bore approx. 155 mm)
To install the hood in recirculating air mode, please proceed as described in the
above Chapter: "Installation of hood for recirculating air mode:", but without
installing the carbon filter.
For final installation of the hood in recirculating air mode,
you need an air exhaust hose for an exhaust nozzle with a
diameter of 150 mm (a) and an outer air exhaust grid (b)
with a 50 mm nozzle, for connecting up the air exhaust
hose. These are not included in the scope of delivery.
Installation of the hood for exhaust air mode:
Some of the pictures are for illustration only
For installation, please proceed as follows:
2. Install the air exhaust hose. (Fig. i)
3. Reinstall the outer and inner chimney shaft.
1. Remove the outer and inner chimney shaft.
Fig. i)
(a)
(b)
fi190920TNM
4
/
4