EXTRACTOR HOOD OPERATION
•
The
PLANET
extractor hood has 4 ventilation speeds. Depending on the amount of steam and haze
when cooking, you can choose a low, medium or high ventilation level.
•
Switch the extractor hood on in the desired mode before cooking. It is recommended to continue the
work of the extractor hood for 3-5 minutes after cooking so that the air in the kitchen is freed of
evaporation residues and odors.
•
The control takes place via a 4-stage sensor control in the glass front of the extractor hood.
•
Keys 1, 2, 3 and 4 switch the motor on in the corresponding power level. Touching the set power level
again switches the motor off again.
•
The field on the far left switches the LED lighting on and off again.
Turbo mode:
When the hood is switched on at the 4th speed, the hood automatically switches to the 3rd
speed after 5 minutes of operation.
Timer / automatic overrun:
The extractor hood has an automatic overrun (5 min) that can be switched on. To
activate this, press and hold the desired power level for 5 seconds. The timer is then activated and
automatically switches off the motor and the lighting after 5 minutes.
Control via remote control (optional):
•
To switch on the hood, press button 1, 4 or 5. To switch off the hood,
press button 1.
•
To increase or decrease the operating speed, press the button 5 or 4.
•
Press button 2 to switch the light on or off.
•
To activate the timer, press button 6 with the hood switched on.
•
To switch off the timer, press the button 6.
MAINTENANCE INSTRUCTIONS
Attention!
Before cleaning the extractor hood, disconnect it from the electricity.
•
Use a damp cloth soaked in warm water with a neutral detergent for external cleaning of the
painted extractor hood.
•
Never use abrasive detergents, coarse sponges or detergents containing soda, acid, chlorides or
solvents to clean the extractor hood.
•
When cleaning, avoid getting moisture on the current-carrying parts of the extractor hood, and wipe
the surfaces with a soft cloth after washing.