COOKER HOOD INSTALLATION INSTRUCTIONS
•
Choose a location to install the hood.
•
Take the extractor hood out of the packaging.
•
Check the operation of the extractor hood, connect it to the
mains and check all of its functions.
•
Pull the metal cables through the holes in the mounting caps
and mounting brackets (Fig. 1).
•
Pull the clips over the metal ropes and tie a knot (Fig. 2, 3, 4).
•
Tighten the clamps of the metal ropes as far as they will go
(Fig. 5, 6).
•
Drill 4 holes in the ceiling for the dowels. Lift and lock the
ceiling brackets (Figure 7).
•
Lift until it connects to the brackets that secure the mounting
covers.
•
Fasten the fastening cover with fastening brackets (Fig. 8).
•
Check that the hood is securely in place, insert the cable and
connect it to an earthed power supply through the socket.
Р
ic.3
Summary of Contents for ROLLION Black
