| 6
6. Ground Cable
Make sure the negative terminal from the battery is
disconnected.
1. Trim half an inch of insulation from the ground cable and
attach to the included ring connector.
2. Install the ring connector to the vehicles metal body, 5 feet
from the amplifier. (Surface must be clean and bare metal)
3. Connect the ground cable to the amplifier’s negative (-)
terminal.
4. Conect the negative cable back onto the battery.
POWER WIRING KIT
Quick Installation
Guide
Rev. 1
SRPK8R
| 7
7. Diagram
Speaker Wire
(not included)
Power Cable
Fuse
Remote Wire
RCA Cable
Car Stereo
Battery
Amplifier
| 8
8. Specifications
Power Cable
Ground Cable
Remote Wire
RCA Cable
Fuse Holder
Fuse
8 Gauge x 17ft (5.2M)
8 Gauge x 3ft (0.9M)
18 Gauge
17ft (5.2M) (Unbalanced, Stereo)
8 Gauge (AGU type)
50A AGU
VM Audio Tech Support
US / Canada
phone: (855) audio-99 / (855) 283-4699
email: help@vmaudio.com
© VM Audio All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
POWER WIRING KIT
