VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
26
Figure 27 — Install fittings
☐
Remove the spin on oil filter and set it aside. Install a cap plug to prevent any
contaminants entering the system.
☐
Install the supplied Tee fitting onto the AOST in the orientation shown
☐
Using the supplied P-clip and fasteners, secure the shorter 3/4 in hose (oil fill)
to the oil fill bracket installed earlier (Figure 28).
Figure 28 — Install oil fill hose