VMAC
– Vehicle Mounted Air Compressors
VMAC Technical Support:
1-888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
74
Compressor Replacement
Read the
“Maintenance and Repair Safety” section prior to
performing any work on the system (beginning on Page 38).
Wear appropriate Personal Protective Equipment and follow
all industry standard safety practices.
Remove the 5 fasteners from the belt guard and remove the belt guard.
Figure 62
– Remove belt guard
Using a 3/8 in drive, remove tension from the drive belt.
Remove the belt and set it aside for later.
Disconnect the 3/4 in hose from the rear of the compressor.
Disconnect the 1/2 in hose from the side of the compressor.
Disconnect the 3 PTFE tubes from the compressor.
After disconnecting the hoses and PTFE tubes, plug the ends
to prevent contaminants from entering the system.
Remove fasteners (5x)
Summary of Contents for G300003
