VMAC
– Vehicle Mounted Air Compressors
Toll Free:
1-800-738-8622 Local: 1-250-740-3200
Fax: 1-250-740-3201
32
7.4.1
System Check Menu
Ensure the pneumatic equipment is securely connected and
turned off.
To power the control box and display box, turn the key switch
from the OFF position to the RUN position.
Once powered, a system check is performed.
During the system check, both the WARNING and
READY LEDs remain illuminated
and ‘SYSTEM CHECK’
is displayed.
If any errors are present the WARNING LED will flash on
& off, the display will enter the ERRORS menu.
If no errors are present the system will go to SYSTEM READY
menu.
7.4.2
System Ready Menu
If any messages are present, the WARNING LED will
flash on & off and the messages displayed. The unit will
run as normal when messages are present.
If no messages are present, both the READY and
WARNING LEDs will be off.
The SYSTEM READY menu will change between the following
screens, SYSTEM READY, VMAC PH# 250 740 3200, VMAC
WWW.VMACAIR.COM, HOUR METER xxxx.x
Pressing ENTER will initiate the start sequence (see Control
System Operation). Once parameters are in the operating range
the SYSTEM RUNNING menu is entered.
Pressing and holding both the BACK and NEXT buttons for
approx. 5 seconds will bring up the USER SETUP menu.
Summary of Contents for RAPTAIR-MF D600007
