VMAC
– Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289 Local: 250-740-3200
Fax: 1-250-740-3201
21
2.10 Change compressor air filter
Follow all safety precautions.
2.10.1 Clean loose dust and debris from the area around the
compressor and the filter cover to prevent contaminants from
entering the system.
Filter Retainer
Filter Cover
Inlet Control Valve
2.10.2 Remove the air filter cover retainer and the cover.
2.10.3 Immediately cover the compressor air intake with masking
tape or a clean cloth to prevent contamination.
Do not use compressed air or perform any other tasks
around the compressor until the filter and cover are
replaced. Never clean the filter element with compressed air
as this will allow some contaminates into the compressor
system. Always replace the air filter element.
2.10.4 Remove the filter element from the filter cover. Clean the
inside of the cover with a clean, dry cloth.
Do not use flammable solvents to clean the inside of the
cover. If a solvent has been used rinse the cover thoroughly
with water and dry it before installing the cover. Fire in the
compressor can cause a thermal event.
