VMAC
– Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289 Local: 250-740-3200
Fax: 1-250-740-3201
5
VMAC will not be held responsible for any liability, injuries, loss or
damage to individuals or to equipment as a result of the failure of any
person to properly adhere to the procedures set out in this manual or
standard safety practices. Safety should be your first consideration in
performing service operations. If you have any questions concerning
the procedures in this manual or require any more information on
details that are not included in this manual, please contact VMAC
before beginning repairs.
1.3 Safety Messages
This symbol is used to call your attention to instructions
concerning your personal safety. Watch for this symbol;
it points out important safety precautions, it means
“attention, become alert!” Your personal safety is
involved. Read the message that follows and be alert to
the possibility of personal injury or death. Be alert; your
safety is involved. While it is impossible to warn about
every conceivable hazard, let good common sense be
your guide.
This symbol is used to call your attention to instructions
on a specific procedure that if not followed may damage
or reduce the useful life of the compressor.
This symbol is used to call your attention to additional
instructions or special emphasis on a specific procedure.
Safety Precautions
Read this information before operating the compressor for the first
time. Follow the information and procedures in this manual for
operation, maintenance and repair. Observe the following items to
reduce the chance of personal injury or equipment damage.
Follow all safety precautions for mechanical work. Moving drive belts
or fan blades are an extreme hazard. Stay clear of all moving parts
when the system is operating. Only qualified personnel should
perform maintenance and repair on system components with the
compressor shutdown.
Proper service and repair are important to the safety of the service
technician and the safe, reliable operation of the equipment. Always
use genuine VMAC replacement parts; do not use a substitute.
