VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
29
Primary coolant drain-back hose
☐
Lay the primary coolant drain-back hose on a bench with the spigot facing up.
☐
From the OEM quick connect, measure 5 3/4 in and cut the hose square
Figure 36 — Primary drain-back hose modification
Figure 37 — Modified primary drain-back hose
☐
Install a hose barb and the supplied 45 in length of hose and secure with hose
clamps.
☐
Install the remaining hose barb and the supplied 90° section of hose.
☐
Orient the 90° section of hose back toward the OEM quick connect (Figure 37).
☐
Tighten all of the hose clamps.
☐
Connect the modified primary drain-back hose to the relocated degas bottle.
☐
Reinstall the intake air box.
5 3/4 in
