VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
52
Figure 71 — Preparing to install the rear battery box
☐
If equipped, remove the cable run tray from the body mount. It should be
secured with push-in fasteners and cable ties (Figure 71).
Figure 72 — Modifying the cable run tray
☐
Remove the fastener from the park brake cable bracket and set it aside (Figure 71).
☐
Remove the “ears” from the cable run tray as indicated (Figure 72).
Remove
fastener
