VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
53
Figure 73 — Installing the rear battery box
☐
Insert the (3x) M10 x 1.5 x 30 bolts through the battery mount brackets into the
battery mount joiner bracket and torque to specification (Figure 73).
Figure 74 — Installing the rear battery box
☐
Thread the nuts onto the bolts until they are just started (Figure 74).
☐
Thread the fourth bolt into the battery mount joiner bracket until the bolt face
is flush with the battery mount joiner bracket (Figure 74).
