VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
69
☐
After ensuring the wire bail on the OEM quick connect is in the locking position,
install the assembly onto the turbo port. The wire locking bail should be heard
to click into place as it secures the quick connect onto the turbo port (Figure 105).
☐
Install the OEM CAC tube onto the CAC. Rotate the CAC tube as necessary to
ensure there is adequate clearance between the tube and the compressor inlet
and fittings (Figure 106).
Figure 105 — Installing the CAC hoses
Figure 106 — Installing the CAC hoses
