10
R55 User manual
CHARGINGE PROCESS
ATTENTION:
Your device requires regular charging. Proceed as follows:
• Fully charge the li-ion battery before initial operation and do
not interrupt the charging process. Also do not switch on or
operate your device during the charging process.
• Make sure that the charger plugs and the charging socket are
dry before charging and that there is no dirt or dust in or on
them.
• Connect the charging plug to the charging socket on your
e-scooter.
• Connect the charger to the power socket via the power plug.
• During the charging process, the LED control lamp on the
charger lights up red.
• Once the li-ion battery of the e-scooter is charged, the LED
indicator light on the charger will turn green and you can
remove the charger.