14
R55 User manual
ASSEMBLY
Step 1
Take the e-scooter out of the packa-
ging and place it on the ground in
front of you with the stand folded
out.
Step 2
Now fold the handlebar upwards and fix it with
the supplied safety screw by tightening the safety
screw with the two hooks in the two openings
provided.
Step 3
Take the handlebar head mount
and place it on the handlebar with
the screws facing upwards. Fix
the bracket to the handlebar with
the two screws. Make sure that
the bracket is screwed centered in
the direction of travel.
Step 4
Loosen the 4 screws on the handlebar head mount with the included
Allen wrench, remove the top of the mount so you can place the handle-
bar head in the mount. Make sure that the handlebar head is centered
in the mount and tilt the handlebar head so that the display is positioned
horizontally (see image at step 3 ).
