PENDIENTE
DE
VALIDACIÓN
4.4.- OPERATING MODES
The device has two operating modes,
manual
and
automatic
, which can be selected using the
and
4�4�1�- MANUAL
The
DREC-C
can operate in manual mode as if it were a standard RCCB.
To operate in this mode, the mode selector switch must be all the way to the top, in OFF posi-
tion, to disable the unit’s automatic reclosing device. (
)
The RCCB must be reclosed manually.
The
AUTO
and
REC
LEDs are off.
Figure 8: DREC-C in manual mode, with mode selector switch at OFF�
4�4�2�- AUTOMATIC
To operate in Automatic mode the mode selector switch must be completely downward,in ON
position, to enable the device’s automatic reclosing system.(
)
The
AUTO
LED is constantly lit and the
REC
LED lights up based on the unit’s status.
Figure 9: DREC-C in automatic mode, with mode selector switch at ON�
13
Instruction Manual
DREC-C
